22 × 60" Sheet
$188 CAD
📅 Submit by  Wednesday Night  → Pickup Friday
📍 Free Pickup —  Whitby, ON
🚚 Shipping  $10 flat  | Free over $99

UV DTF Sticker Sheet 22 × 60"

Our largest sheet — maximum designs, maximum value. Perfect for high-volume sticker businesses.

22 × 60"
Sheet Size
$188
CAD
🎨 These are UV DTF Stickers — not apparel transfers! UV DTF stickers adhere to hard surfaces like tumblers, cups, phone cases, and laptops. They are not for fabric For clothing and apparel, see our DTF Transfers.
💡 The Kixxl builder is pre-sized to 22 × 60" — just upload your designs and arrange them to fill the sheet. Use "Create a Gang Sheet" above to build in the designer, or "Upload a Gang Sheet" if your file is already print-ready!
1
🎨

Upload Your File

Prepare a print-ready PNG at 300 DPI sized to 22 × 60". Upload directly on this page.

2
🖨️

We Print It

Your stickers are printed in full-colour UV ink on clear transfer film. Ready in ~4 business days.

3
✨

Peel & Stick

No heat press needed! Clean your surface, peel, stick, and remove the top film. Done!

💧
100% WaterproofUV-cured ink holds up to water, washing, and daily use
✨
Vibrant Gloss FinishRich, vivid colours with a premium glossy look
🧴
Dishwasher SafeHolds up to dishwasher cycles when applied correctly
🎯
No Heat Press NeededJust peel, stick by hand, and remove the top film

File Requirements ✦

✓
300 DPI minimum — low resolution = blurry print. We do not upscale files.
✓
PNG format required — no JPEG files. Lossy compression affects print quality.
✓
Size your file to exactly 22 × 60" — we do not resize artwork.
✓
Transparent or white background — UV DTF prints on clear film, backgrounds will show.
✓
CMYK colour mode recommended — RGB may shift slightly when printed.
✓
Leave a small border around designs — avoid placing artwork right at the sheet edge.
⚠ We print as-isNo edits or corrections are made. Please double-check your file before submitting — image quality and accuracy are the customer's responsibility.

How to Apply ✦

1
🧼
Clean Your Surface Wipe with isopropyl alcohol and let dry completely. Remove all dust, oil, and residue for best adhesion.
2
✂️
Cut Out Your Design Cut around your sticker leaving a small border. The film is clear so no need to cut perfectly tight to the artwork.
3
🫳
Peel & Stick Peel the backing, position on your surface, and press firmly from the centre outward to remove bubbles.
4
✅
Remove the Top Film Slowly peel the clear top layer at a low angle. Press down any edges that lift. Your sticker is now permanent!